20T Hydraulic Gear Puller Set, 2 or 3 Jaws Wheel Bearing Puller Kit Pulling Separator with Carrying Case for Wheel Hubs Rotors Car Axles Pulleys Brake Drums

Details Oil Return Switch:When applying pressure,tighten it in the ON direction,and when releasing pressure,tighten it in the OFF direction. Carrying Case:It allows you to store this product and easily carry it to the place you need. Specifications Style:Modern Color:Light Blue Material:Alloy Steel,Rubber Process:Forging Assembly Required:Yes Model:YL-20 Max.Stroke:60mm/2.36in Max.Reach:195mm/7.68in Max.Spread:350mm/13.78in Product Size(L*H):50*51cm/19.69*20.08in Handle Length:41cm/16.14in Package Size:56*28*11cm/22.05*11.02*4.33in Rated Output:20T/44092.45lbs Gross Weight:16.5kg/36.38lbs Package Included 1*Pump Body 1*Handle 3*Jaws 1*Pull Ring 6*Screws 6*Pulling Tabs 1*Carrying Case 1*English Manual Notes 1.Please read the English manual carefully before use. 2.Please note that the rated output data is calculated using a calculation formula based on the size data of the length and diameter of the oil cylinder,so the rated output may have deviations and is only for reference. 3.The effective distance of the piston starting rod of the hydraulic puller is only 1.97 inches,so the extension distance should not be greater than 1.97 inches during use. 4.If you want to retract the piston activation rod,you only need to slightly loosen the oil return valve rod in a counterclockwise direction,and the piston activation rod will gradually retract. 5.The hydraulic puller uses(GB443-84)N15 mechanical oil(not included)at 23-113°F and(GB442-64)synthetic spindle oil(not included)at-4-41°F. 6.Please note that the area with the blue outer cover is not an oil cylinder,but rather an oil storage rubber bag inside.The painted cover is for protection!The square tooth trapezoidal thread is the true part of the oil cylinder. 7.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement,and make sure you do not mind before you order.

• 【Sturdy and Durable】Made of alloy steel with a forging process, this wheel bearing puller is wear-resistant, and durable, ensuring your long-term use.
• 【Wide Application】3 jaws or 2 jaws can be easily interchanged, and they can be used vertically and horizontally without being limited by the venue, suitable for different scenarios.
• 【Easy to Use】You just need to insert the handle into the top of the pump body and move the handle up and down to start working, which is easy. The pump head is very flexible and can rotate 360°.
• 【Thoughtful Design】The thickened elastic top pin allows you to accurately locate the center. The pump body formed in one go is smooth and seamless, so you don't have to worry about breakage or oil leakage. The long handle with anti-slip rubber provides you with a comfortable grip and is not tiring after long-term use.
• 【Application】This 20t hydraulic gear puller set is suitable for factories, repair sites, railways, vehicles, etc. It is used to disassemble truck wheels, sprockets, wheel bearings, pulleys, shaft sleeves, rotors, car axles, gears, etc.